Showing posts with label wireless bridge. Show all posts
Showing posts with label wireless bridge. Show all posts

Long Range 802.11G Indoor Ap Review

Long Range 802.11G Indoor Ap
Average Reviews:

(More customer reviews)
Bought this AP in January 2010. Worked fine for several months - nice features, good range. Then it just died. I tried to contact Bountiful, but the company does not seem to exist any more. Very disappointing.

Click Here to see more reviews about: Long Range 802.11G Indoor Ap

The long range indoor Bountiful WiFi BWAPG1000 is the most powerful wireless access point on the market today providing nearly 1000mW of power. Use one access point in place of three to reduce your install and hardware costs.Perfect for large homes small to medium sized business hotels hospitality RV Parks. Features include POE ready SNMP WDS bridge and repeating with WPA encryption WPA2 802.1x and more. Unit comes in robust extruded aluminum housing with built-in wall mount without fans.

Buy NowGet 24% OFF

Click here for more information about Long Range 802.11G Indoor Ap

Read More...

Sony VAIO Wireless LAN Access Point Pro, 2.4 GHz (PCWA-A200) Review

Sony VAIO Wireless LAN Access Point Pro, 2.4 GHz (PCWA-A200)
Average Reviews:

(More customer reviews)
Would have given it 0 stars, but obviously it's not available. This product is absolutely terrible. It does not work with even the Sony Wireless LAN Card. Had to return it and purchase the Linksys.

Click Here to see more reviews about: Sony VAIO Wireless LAN Access Point Pro, 2.4 GHz (PCWA-A200)

Access e-mail, the Internet, or your network wirelessly! The new Sony VAIO Wireless LAN Access Point lets you share files, drives, printers with one or more computers on your wireless network. Using any IEEE 802.11b industry-standard wireless LAN PC Card, you are assured of secure communication, high-speed data transfer rates and a range of up to 46 m (line-of-sight).

Buy Now

Click here for more information about Sony VAIO Wireless LAN Access Point Pro, 2.4 GHz (PCWA-A200)

Read More...

Netgear HE102 802.11a Wireless Access Point Review

Netgear HE102 802.11a Wireless Access Point
Average Reviews:

(More customer reviews)
I did a lot of research before purchasing a solution for my home wireless network. I read a lot of horror stories about people having a hard time setting things up, connections dropping, etc., so I was a little spooked about spending a lot of money for something that might be a pain. Boy was I in for a surprise.
I picked this NetGear product because I have had good experiences with their products in the past, and hadn't really heard anything particularly bad about this product. When it arrived, I was VERY impressed. I simply plugged it in, connected it to my Ethernet hub, put my new network card into my laptop (I bought the NetGear HA501 at the same time), and viola! It just worked! No complicated setting to configure, nothing to change on my laptop, my network, nothing. And its range is outstanding.
Also, for those of you trying to decide between 802.11a and 802.11b, choose 802.11a. While you might see just a little perceived increase in speed, the reliability of your connection is so much better. With 802.11a you don't have to worry about microwaves, cell phones, cordless phones, and other devices interfering. With 802.11b there is so much interference that connections can (and do) drop or be very flaky.
Good luck!

Click Here to see more reviews about: Netgear HE102 802.11a Wireless Access Point

NETGEAR's HE102 802.11a Wireless Access Point provides users untethered access to the network and Internet whether in their conference room, home, classroom or cafeteria. With the NETGEAR HE102 and other NETGEAR 802.11a products, you can create a network from the ground up or extend your wired network to accommodate new locations and users. With blazing speeds you can deploy high-bandwidth applications never before possible. Send and receive large files, including high-quality audio and video, anywhere in your business or classroom. Share presentations and collaborate on graphics-intensive projects without being tied to your desk. You'll immediately experience reliable, IEEE 802.11a LAN connectivity that's protected with industry-standard 64/128/152-bit WEP encryption.

Buy Now

Click here for more information about Netgear HE102 802.11a Wireless Access Point

Read More...

Ubiquiti Networks NanoStation2 2.4GHz 802.11bg Review

Ubiquiti Networks NanoStation2 2.4GHz 802.11bg
Average Reviews:

(More customer reviews)
Hello
1.Ease of Installation.
2.The units are very watertight and weatherproof.
3.Appearance-wise, the units are architecturally unobtrusive.
4. Reset to factory default is too easy just press the button
5.They are inexpensive, reliable and fast.
6.Power over ethernet capable.
7.Web interface.
8. Mounting hardware included.
9. rich online manual for operating System.
10.online forum.


Click Here to see more reviews about: Ubiquiti Networks NanoStation2 2.4GHz 802.11bg

Nanostation 2, the Ultimate 2.4GHz CPE for the Global WISP Community. Featuring Adaptive Antenna Polarity (AAP) TechnologyThe device designed to advance the Global Wireless ISP industry to the next level. Featuring a compact indoor/outdoor design and an interface so intuitive even the most technically challenged can instantly become experts. But, don't be fooled; it is as powerful as it is simple. NanoStation2 packs some phenomenal performance with a revolutionary design combining a hi-gain 4 antenna system, advanced radio architecture, and highly researched and developed firmware technology allowing throughput, stability, and capacity performance rivaling even the highest-end WiMax networks.POE power supply / injector included.Part number: NS2802.11bg 2.4GHzDatasheetQuick Setup GuideUser's GuideSetting up a Vista computer to talk to a UBNT deviceBeginner's Quick Setup Guide for Mobile Users (RV's, Marine, Truckers)How To Configure A Simple AP with AirOSAirOS Wireless Repeater/Network Extender ConfigurationBridging two locations using two UBNT devices

Buy Now

Click here for more information about Ubiquiti Networks NanoStation2 2.4GHz 802.11bg

Read More...

ZyXEL PLA-450 200 Mbps Powerline HomePlug AV 802.11g Wireless Access Point Review

ZyXEL PLA-450 200 Mbps Powerline HomePlug AV 802.11g Wireless Access Point
Average Reviews:

(More customer reviews)
We recently built out our basement and before I spent the time and money to cat5 my whole house or possibly add a second cable modem, I decided to give the PLA-450 + 1 PLA-401 a try. To my amazement, I saw no degradation of speed when connected to the PLA-450 wirelessly at a reasonable range than I did when connected directly to my cable modem. This powerline duo smokes. My cable modem is on the second floor and my primary DLink wireless router is connected to it. Needless to say, getting great coverage from the second floor to my basement was not possible on the DLink. So the PLA-450 acts as my second wireless router (called an access point) allowing me to plug it into any wall outlet in the house. You do have to have at least 1 PLA-401 (connected to the primary router) and then your powerline link is complete. The PLA-450 is a good wireless device permeating interior walls with ease and maintaining reasonably strong reception with my laptop - even with a floor in between. Accessing the PLA-450 device via a browser is a little tricky the first time. You have to temporarily change you IP address on your network connection. I called support and they were easy to get ahold of and nice and friendly. The instructions do tell you what is needed so a call is probably not necessary for most users. I am thrilled that I can get near cat5 performance without having to hard-wire my house. A great product that suits my need perfectly.

Click Here to see more reviews about: ZyXEL PLA-450 200 Mbps Powerline HomePlug AV 802.11g Wireless Access Point



Buy NowGet 15% OFF

Click here for more information about ZyXEL PLA-450 200 Mbps Powerline HomePlug AV 802.11g Wireless Access Point

Read More...

Apple Time Capsule MB764LL/A 500GB Review

Apple Time Capsule MB764LL/A  500GB
Average Reviews:

(More customer reviews)
Hi All,
Please take a look at my review of the Dual Band Airport Extreme: Apple MB763LL/A AirPort Extreme Dual-band Base Station I have pasted it below this review for your convenience.
Since I have already reviewed the airport extreme, I will not go into details on the routing/wireless/speed options of this time capsule...they are the exact same product and I assure you, you can get great details from my review below.
Time Capsule remains as an exciting niche product that houses a hard drive in its body. The capsule can be purchased with a 500gb and or a 1TB hard drive. Note: the hard drive is not user servicable.
The primary reason for this device to exist was so that MAC users could easily backup their OS X machines using time machine directly to the router. For that it is the ultimate product.
Why then do I give it a 4 out of 5?
Simply because my experience with the hard drive has been that it regularly disconnects and drops connected users....which to me is a flaw when Time Machine is trying to backup my computer. Yes, I have restarted from scratch, reloaded the firmware, etc...but to no avail. I have also spoken to applecare and will be trying a replacement capsule in the days ahead to see if the problem can be alleviated.
I still give this a 4/5 due to my belief in the routing engine and software that sets up and maintains these devices. My review on the airport extreme base station will solidify my 4/5 reviews.
This product is worthy of a 5/5 review once the hard drive issues are ironed out. I hope I am alone in this problematic situation but time will tell. Ironically, my older time capsule has been running for about a year without any issues....so I am hopeful I have a one off problem.
As always, please leave me comments with suggestions, questions, etc.
Below is my review of the dual band Airport Extreme Base Station:
Hi All,
True to my gadget envy, I acquired one of these dual band extreme base stations to see if they held up to the hype. Sure enough, Apple has improved an old mediocre product with a new more powerful hardware engine and improved software abilities.
Features:
802.11 A/B/G/N DUAL Band radios at 2.4ghz and 5ghz simultaneously.
Gigabit Ethernet ports 1x Wan and 4x Lan.
Guest wireless network.
Disk sharing via USB connected drive.
Access to shared disk via MobileMe (apple mobile me subscribers on os x).
The box comes with the router, the power cord, software cd, and documentation....limited documentation.
Time to test.
Setup: Setup of an apple base station is unlike any other in that you cannot access the setup portal via your web browser. You must install the Apple Airport utility (both mac and windows) in order to set the router up. The software is built very well and provides the typical ease of use known to MAC users. You simply walk through a setup wizard and define simple options for your internet connection, your wireless network, etc, etc. NOTE: When setting up your wireless networks you are able to hit the options button so that you can define a 5ghz network as well (example, main wireless network called wifi, the 5ghz is called wifi (5ghz)). Very easy to setup and get going. You are also able to easily define a SECURED (wpa/wpa2) guest wireless network....which simply means that if you have a visitor they can use wi-fi but not get to any of the computers on your home network. Very Secure....and a great feature to boot.
I was using the old Apple Base Station and kept switching between it and a d-link wireless n router.... I got one of these primarily due to dual band and guest access.
Yes, there are other routers out there that can do this for a bit of a lower cost...but the elegance of the Apple Airport Utility make this a router that can be setup without too much hassle. The software will also identify problems in the setup and have you correct them before it uploads them to the router. These abilities alone make this a router for the non-geeks to be able to setup a robust networking environment at home.
Wireless: As I mentioned before, I am comparing this to an older model apple base station that was single band and worked in the N range. Also compared this against a D-Link DIR-655 which is a 2.4ghz Wireless N router. The section on speed below will detail my wireless experience.
Speed: I have Comcast cable modem service which gives me about 15-25mbps down and 2mbps up....I live in an area where there are probably 5-10 subscribers...so my speed is generally GREAT and never experiences a slow down. The first thing I do when I play with a new router is do a speed test....the new base station is comparable to the others and gets the same exact download/upload speeds over ethernet. There is one exception....using the wireless on this unit yielded BETTER results then the older model and the d-link. Normally when doing a speed test over wireless I get about 12-15mbps and 2mbps up....with this router I was able to successfully hit the 20mbps mark and 2mbps UP. WIN WIN!!!! So I figured that this may be an anomaly and thus proceeded to test a download from Microsoft - a 3.4gb file - which normally downloads anywhere between 900kpbs and 1.2mbps. Surprise.....with the new base station I stayed at 1.3mbps and it did not hiccup even once. The same was true when downloading via a wireless connection, albeit the speed was 1.0mbps....faster then I have ever gotten before. WIN WIN again!
Disk Sharing - Not much to be said here...I attached a Western Digital USB hard drive 320gb and shared it. You simply go into the Airport Utility software and setup sharing of the hard drive and define which password should be used. You can either use the password for the router or setup a separate password to use with Disk Sharing. Speed is dependent upon wired or wireless. I tested while transferring 3 files...one was 2mb one was 100mb and one was a 2.5gb file. The two mb file of course went over before I could blink...the 100mb transferred over in about 3-4 minutes...the 2.5gb took about 15 minutes. The first transfer test was with ETHERNET connectivity. I did the same tests over wireless and found that the times doubled...naturally since wireless is a bit slower I expected that and had no issue with the times.
Mobile-Me - I have not tested the mobile me features just yet but will be testing them in the days ahead and post my results here.
So far I feel this router has hit perfection and will now find a permanent spot in my home...at least until something better hits.
Please do leave me comments with suggestions on the review and or any questions you may have.


Click Here to see more reviews about: Apple Time Capsule MB764LL/A 500GB

Wireless hard drive that works seamlessly with Time Machine in Mac OS X Leopard. It's also a full-featured 802.11n Wi-Fi base station Time Capsule works with Mac computers, PCs, iPhone, iPod touch, Apple TV, and virtually all 802.11a/b/g/n Wi-Fi wireless devices all at the same time Protect yourself with the built-in firewall and industry-standard encryption technologies including WPA/WPA2 and 128-bit WEP System Requirements - For Time Machine backup -Mac with Mac OS X Leopard / For setup and administration -Mac computer with Mac OS X v.10.4 or later, CD drive, and Ethernet or wireless networking capability; PC with Windows XP (SP2) or Windows Vista, CD drive, and Ethernet or wireless networking capability / For wireless client access -Mac with AirPort or AirPort Extreme wireless capability; PC with 802.11a/b/g/n / For shared hard drive -Mac with Mac OS X v10.4.8 or later; PC with Windows XP (SP2) or Windows Vista; Bonjour

Buy Now

Click here for more information about Apple Time Capsule MB764LL/A 500GB

Read More...

NETGEAR WN802T RangeMax Next Wireless-N Access Point Gigabit Edition Review

NETGEAR WN802T RangeMax Next Wireless-N Access Point Gigabit Edition
Average Reviews:

(More customer reviews)
My husband has a computer business and has purchased 5 of these devices for various customers. Each and every one of them have failed. Three of them within the 3 months Netgear will provide free support for and two of them after 1 year.
When they work they don't work so well, a lot of disconnects, and network not found. Working with support stated that too many wireless networks in a congested area will cause this. Understandable, but hardware failures are not understandable.
Out of the five of them, Netgear has replaced the three that failed withing the 90 period and they have been taken out of service since then. There were too many network disconnects to be useful.
When they fail the power light comes on, but nothing else. No network light when the cat5 cable is plugged into it, nor does the wireless work on the device either.
My husband made the mistake of purchasing them when they were fairly new and paid over 170.00 per. What a mistake. DO NOT PURCHASE THIS AS IT IS JUNK.

Click Here to see more reviews about: NETGEAR WN802T RangeMax Next Wireless-N Access Point Gigabit Edition

The NETGEAR WN802T RangeMax Next Wireless-N Access Point Gigabit Edition lets you easily set up a wireless network in your home so you can share a single internet connection with everyone in your household at speeds up to 300 Mbps. You can stream music and video, make internet phone calls, videoconference, and surf the web, all at the same time.
Easy Setup The WN802T makes it easy for even a novice to set up a wireless network: just plug the included Ethernet cable from your LAN into the device and insert the included CD into any computer on the network, which will provide step-by-step instructions. The WN802T offers a myriad of placement options by including a stand for vertical placement and also a wall-mount kit.
The WN802T employs a web-based interface for configuration for compatibility with any computer with a web browser. The firmware is also upgradeable via the web interface so you can be sure your access point will always be up-to-date.
New Technology Means Blazing Speeds and Backwards Compatibility The WN802T complies with the latest 802.11n draft specification which allows for speeds up to 300 Mbps; this maximum speed can be achieved when used with other TopDog devices. By utilizing MIMO (multiple-input, multiple-output) technology, the WN802T has speed and range far surpassing the older 802.11g standard. The preset antennas in the access point ensure that the device is always tuned for optimal performance, and NETGEAR's Wi-Fi Multimedia technology optimizes audio, video, and voice applications.
By using Gigabit Ethernet for the backend, you'll be certain that the access point is receiving data at the highest possible speeds, ensuring the 300 Mbps wireless throughput is not going to waste.
If you still have computers that use 802.11g or 802.11b, don't fret as the access point is backwards compatible with the older wireless standards and can be set so all your computers can connect to the network. The access point will automatically figure out the connection type and work accordingly.
Security Made Easy NETGEAR's Touchless WiFi Security makes it quick and easy to set up network security on a WiFi network by asking for a passphrase from the user. The WN802T supports WiFi Protected Access (WPA2-PSK, WPA-PSK), and 64-bit and 128-bit WEP encryption for 802.11b/g networks. Additionally, you can set security through MAC address authentication, allowing only authorized users onto the network. There is also support for 802.1x RADIUS support with EAP TLS, TTLS, and PEAP.
The NETGEAR WN802T RangeMax Next Wireless-N Access Point Gigabit Edition is backed by a 1-year warranty.
What's in the Box WN802T RangeMax Next Wireless-N Access Point, power adapter, Ethernet cable, stand, wall-mount kit, resource CD, installation guide, warranty/support information card.

Buy NowGet 17% OFF

Click here for more information about NETGEAR WN802T RangeMax Next Wireless-N Access Point Gigabit Edition

Read More...

Ubiquiti Networks PICO2 2.4GHz 802.11bg Review

Ubiquiti Networks PICO2 2.4GHz 802.11bg
Average Reviews:

(More customer reviews)
This is a really nice, really small device that can act as an access point (transmit a wireless signal), or as a station (receive a wireless signal), which is also known as a "client-bridge". Confusion abounds though regarding the specifications of this cool device...
First off, the photo in the Amazon listing is that of a Ubiquiti Nanostation. The Picostation is much smaller and has an external antenna connector. I chose this model not just because of its small size, but also because it has that antenna connector. This makes the unit MUCH more flexible than a model with only a built-in antenna, because you can swap to an antenna with more gain than the provided 6dBi one if need be, or use a directional antenna rather than the supplied 360 degree omni antenna. Or you can simply fit it with a higher gain omni.
Furthermore, there is confusion about how powerful the Picostation is. Some descriptions rate the output at 100 milli-watts, while other descriptions put it at 1,000 milli-watts. The Ubiquity website adds to the confusion with a poor link to the product page. It is here: [...]. Per the Ubiquiti datasheet for the Picostation2, it rates the power output at up to 100mw (though at the highest connection speed of 54Mb/s this figure actually drops to 32mw). The claims of up to 1,000mw I believe is either a typo or it has to do with "Effective Radiated Power" (ERP), which is the actual power generated, and varies according to several factors, primarily the choice of antenna. If you take the amount of power the Picostation generates at its fastest connection speed of 54Mb/s, which again is 32mw, and multiply that by the gain you get from the supplied 6dBi antenna (there is a formula for this), you get 125mw of effective power. However, if you instead mate the Picostation with an easily found 15dBi antenna you get, count 'em, 1,000mw of effective (actual) radiated power. That's why I like external antenna connectors. ;>
Having said all that, "power" is just one aspect of getting a fast, reliable wireless connection. Too many variables to state here, but as a real life example the Picostation I purchased replaced an Engenius brand wireless unit rated at 400MW. Both have acted as a "client bridge" (a receiving station connected to a computer), receiving a wireless signal from a 400MW Access Point with a high gain directional antenna. The Picostation slipped into the environment without incident, with the supplied antenna, even though it's theoretically less powerful than the unit it replaced.
Another point of confusion is with the various Picostation models. There seem to be three. This one being reviewed is simply the "Picostation2". This is a 2.4Ghz device that works on the wireless "b" and "g" standards (2.4Mhz). There is also the "M2HP" version, which utilizes Ubiquiti's proprietary AirMax wireless technology. You can achieve speeds up to 150Mb/s throughput, but it requires an Airmax capable model on both ends of the link. No need to spend the extra money for this model unless you meet that criteria. Finally, there is a 5Ghrz model that operates with the "a" standard (5mhz). Some, but not all, wireless cards in laptops can receive "a" signals as well as "b" and "g" signals.
All said and done, I am a big fan of the Ubiquiti line, and as a consultant I have switched to this line exclusively for my client's wireless networking needs.


Click Here to see more reviews about: Ubiquiti Networks PICO2 2.4GHz 802.11bg

PicoStation ships standard with the powerful and intuitive AirOS by Ubiquiti Networks. It also is supported by a Linux SDK to encourage open source development.In addition to the LSDK support, PicoStation ships with 32MB RAM and 8MB Flash to encourage developers to customize Pico Firmware to create their own applications such as Hot-Zone deployments, mesh networking, and metering applications.Features Include:Processor Specs: Atheros MIPS 4 KC, 180MHzMemory Information: 32MB SDRAM, 8MB FlashNetworking Interface: 1 x 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet InterfaceApprovals: FCC Part 15.247, IC RS210, CERoHS Compliance: YESPower Method: Passive Power over Ethernet (pairs 4,5+; 7,8 return)POE power supply / injector included.DatasheetDatasheetQuick Setup GuideUser's GuideSetting up a Vista computer to talk to a UBNT deviceBeginner's Quick Setup Guide for Mobile Users (RV's, Marine, Truckers)How To Configure A Simple AP with AirOSAirOS Wireless Repeater/Network Extender ConfigurationBridging two locations using two UBNT devices

Buy Now

Click here for more information about Ubiquiti Networks PICO2 2.4GHz 802.11bg

Read More...

Intellinet Wireless 150N Access Point - Wireless access point - 802.11n - 802.11b/g/n Review

Intellinet Wireless 150N Access Point - Wireless access point - 802.11n - 802.11b/g/n
Average Reviews:

(More customer reviews)
This product was ordered for a customer and it worked great in his 3 story hotel when linked to his network. This item is well built and is very sturdy.

Click Here to see more reviews about: Intellinet Wireless 150N Access Point - Wireless access point - 802.11n - 802.11b/g/n

Intellinet 524704 Wireless 150N Access Point

Buy NowGet 46% OFF

Click here for more information about Intellinet Wireless 150N Access Point - Wireless access point - 802.11n - 802.11b/g/n

Read More...

Ubiquiti BULLET-M2-HP Outdoor 802.11n 802.11g Review

Ubiquiti BULLET-M2-HP Outdoor 802.11n 802.11g
Average Reviews:

(More customer reviews)
Works great.....we are changing our whole system to these devices. The need better electrical protection.

Click Here to see more reviews about: Ubiquiti BULLET-M2-HP Outdoor 802.11n 802.11g

100Mbps+ of REAL TCP/IP Throughput over outdoor multi-km linksNo radio card / host board issuesNo RF cable quality concernsNo mechanical stability concernsNo enclosure mounting requirementsJust Plug and Go.Features Include:Processor Specs: Atheros SOC, MIPS 24 KC, 400MHzMemory Information: 32MB SDRAM, 8MB FlashNetworking Interface: 1 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet InterfaceApprovals: FCC Part 15.247, IC RS210, CERoHS Compliance: YESRF Connector: Integrated N-type Male Jack (connects directly to antenna)Power Method: Passive Power over Ethernet (pairs 4,5+; 7,8 return)Bullet does not include a PoE injector or power supply.Recommended DC voltage range is 10V to 24V.Datasheet

Buy Now

Click here for more information about Ubiquiti BULLET-M2-HP Outdoor 802.11n 802.11g

Read More...

Netgear ME101 802.11b Wireless Bridge Review

Netgear ME101 802.11b Wireless Bridge
Average Reviews:

(More customer reviews)
This has got to be one of the worst wireless products to come out of Netgear.
If you want a reliable unit, buy something else.
If you want something easy to configure and install, buy something else.
If you want something that won't get confused when it starts seeing your neighbor's wireless access point, buy something else.
If you would like to be able to call technical support and get a meaningful response, buy something else.
This thing locks up all the time. Sometimes it lasts 15 minutes, sometimes you might get 30 minutes of use out of it. Then you have to power cycle it to make it work again for another 15 minutes. I have tried to mate it to wireless access points made by Netgear, D-Link, Linksys, Adaptec, Cisco. I have tried having only one AP "visible" in its pitiful range; having multiple access points; upgrading the firmware. Nothing changes its behavior of random locks after a relatively short period of time from the moment you turn it on.
Finally, if you don't want to end up like me writing reviews on here, BUY SOMETHING ELSE! Anything.
It can not possibly be any worse than this utter failure and ripoff.

Click Here to see more reviews about: Netgear ME101 802.11b Wireless Bridge

The NETGEAR ME101 802.11b Wireless Ethernet Bridge makes it easy to connect your gaming console, PC or Internet radio to your wireless network. No additional Ethernet cabling is required, and no other adapter is needed to connect a device that has an Ethernet port. With its attractive, sleek platinum casing, the ME101 can be conveniently mounted on the wall without your home decor taking an aesthetic hit. The powerful, detachable antenna provides greater range and signal strength than most other Wi-Fi wireless devices.

Buy Now

Click here for more information about Netgear ME101 802.11b Wireless Bridge

Read More...

UBIQUITI NANOSTATION 2 LOCO 802.11B/G WIRELESS CPE Review

UBIQUITI NANOSTATION 2 LOCO 802.11B/G WIRELESS CPE
Average Reviews:

(More customer reviews)
Purchased elsewhere.
Pro:
Once you spent some time researching, this thing worked. It is relatively inexpensive and easy to set up once you have the instructions (even for the non-network computer pro). BEWARE upgrading firmware! (see below)Con:
Assumes you have networking experience with these devices as there is no enclosed printed manual (not even a simple setup sheet which is available if you research the forums!). Labeling is wrong from PoE to Nano and can fry your computer if connected wrong (connect on the Nano LAN socket with Cat 5 cable to the PoE socket on the PoE power supply AND with a cat 5 cable connect the LAN on the PoE power supply to your LAN card)! Must search website for specific instructions - ie to setup for Free public WiFi, hit or miss search. No clear instructions to setup IP address on the computer to access the device - just typing in 192.168.1.20 doesn't work unless you set up your LAN connection first (instruction buried on website). Instructions are scattered all over the website - no clear instructions for easy setup. Instuctions are tedious and incomplete. Trouble with firmware release v 3.5 - AirOS (see below). Clearly a beta release for all. Not for the non technical person at all. Network experts may screw up their system by upgrading to firmware v 3.5. What a mess!
The labeling is wrong. On the Nano device it should say PoE (not LAN) so you connect this end to the PoE. It is mislabeled LAN. Do not connect this to your LAN. There should be a wiring diagram and the instructions should be arranged in order in a single area on the website. Hunting for info is a NO NO as is the serious mislabeling issue. NOT a 'plug and play' - a 'plug and fix and research and ask and fix and pray'! Must have time to waste to set it up correctly (because of the missing instructions). And for techies, trouble abounds if you have an expensive customer set up and upgrade your older firmware to v 3.5 - clearly this version of AirOS is NOT ready for prime time and will cause headaches for some experts let alone the non techie.After investing time trying to just find instructions to setup the Nano for a free public WiFi access, I found buried, in one of the forums, a person who wrote a short highly detailed easy guide with step by step instructions (see Comment for the link) which the manufacturer failed to include in the product box ( because they didn't write it and assume you are a network pro ). The instructions included with the Nano are printed on the outside of the box and are crappy. Again, there is NO enclosed setup manual nor CD. Advise that you search the website for info before you buy and read the forums. There are problems with AirOS firmware v 3.5. Some network experts have upgraded their systems from earlier versions to v 3.5 and have had numerous problems with the upgraded system shutting down. These are pros who do network installation for a living. There is a lively debate on this. The company at first denied it. Now it is working to fix this problem. My advice is that if it works, do not upgrade your firmware to the current v 3.5. Leave it alone. Some have reported that even after flashing back to a prior version, some problems still remained!
Please read the forums on this mess.This device would be rated higher if the company included proper set up instructions instead of hiding them and fixes the problem with the firmware v 3.5 (should not have been released).


Click Here to see more reviews about: UBIQUITI NANOSTATION 2 LOCO 802.11B/G WIRELESS CPE

UBIQUITI NANOSTATION LOCO2 WIRELESS CPE OUTDOOR 8DBI DUAL-POL 802.11b/gNanoStation Loco provides a breakthrough in cost, reliability,performance. Features up to 10km of range performance, 25+Mbps of throughput performance, & the powerful, intuitive AirOS by Ubiquiti. NanoStation Loco is the latest innovation in broadband wireless CPE technology from Ubiquiti.Features Include:Processor Specs: Atheros MIPS 4 KC, 180MHzMemory Information: 16MB SDRAM, 4MB FlashNetworking Interface: 1 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet InterfaceApprovals: FCC Part 15.247, IC RS210, CERoHS Compliance: YESMounting Kit: Pole Mounting Kit includedPower Method: Passive Power over Ethernet (pairs 4,5+ 7,8 return)POE power supply / injector included.A DatasheetQuick Setup GuideUser's GuideSetting up a Vista computer to talk to a UBNT deviceBeginner's Quick Setup Guide for Mobile Users (RV's, Marine, Truckers)How To Configure A Simple AP with AirOSAirOS Wireless Repeater/Network Extender ConfigurationBridging two locations using two UBNT devices

Buy Now

Click here for more information about UBIQUITI NANOSTATION 2 LOCO 802.11B/G WIRELESS CPE

Read More...

Linksys Wireless-G Access Point WAP54G - Wireless access point - Ethernet, Fast Ethernet - 802.11b/g Review

Linksys Wireless-G Access Point WAP54G - Wireless access point - Ethernet, Fast Ethernet - 802.11b/g
Average Reviews:

(More customer reviews)
Bottom Line: The "Linksys Wireless-G WAP54G" represents the best of both worlds; it can meet your need for current 802.11b standards, but still has the flexibility to expand beyond to 54Mbps.
Wireless-G is the next wave in wireless networking technology. Wireless-G WAP's, and Network Interface Cards (NIC's) are capable of transmitting and receiving data at speeds of up to 54Mbps, almost five times faster than the widely deployed Wireless-B (802.11b) products found in homes, businesses, and public wireless hotspots around the country, and indeed around the world. Wireless-G devices can utilize either the 2.4 GHz or 5.0 GHz band, and some can utilize both bands. Those Wireless-G devices that share the 2.4GHz radio band, can also work with existing 11Mbps Wireless-B equipment, while those which utilize the 5.0Ghz band will interoperate only with Wireless-A (802.11a, 54Mbps) equipment. Dual-band Wireless-G equipment are capable of interoperating with all three protocols; i.e. 802.11a (54Mbps), 802.11b (11 Mbps), and 802.11g (54Mbps).
Enter the "Linksys Wireless-G WAP54G Wireless Access Point." The "Linksys Wireless-G WAP54G" operates at a frequency of 2.4 GHz, and supports the following wireless protocols: 802.11b and 802.11g (draft). The "Wireless-G WAP54G" can transmit and receive networking traffic in a range of 1 - 54Mbps. I choose the "Linksys Wireless-G WAP54G" for three reasons; 1. Because the card operates at a frequency of 2.4 GHz the same frequency band I currently use for my wireless communications; 2. The card is compatible with the 802.11b 11Mps standard, and; 3. Wireless equipment that operates at 2.4 GHz vs. 5.0 GHz have better range; i.e. 100-150 ft. (2.4Ghz) v. 50 - 75 ft. (5.0Ghz)
Installation
Like all of my previous WAP installations, I placed the "Linksys Wireless-G WAP54G" high on a shelf in the upstairs spare bedroom closet where it would cover the most area. Upon unpacking the box, the first thing you'll notice about the "Linksys Wireless-G WAP54G" is the handsome distinctive rich blue with black accents, color of the WAP inherent to all Linksys products. Another distinguishing feature is dual antennae and a plethora of LED (Light Emitting Diode) readouts on the front panel, which relay vital information to the user, such as connection speed with the wired hub and wireless clients.
Linksys' installation scheme requires that you first install the configuration software onto a computer tied to the wired portion of your network, and then plug the "Linksys Wireless-G WAP54G" into the same hub. Once this was accomplished and the unit was powered on, I ran the installation program and configured the WAP. The whole procedure took me less then five minutes to complete. The default IP address is in the 192. range, but it can be changed to conform to the particular IP Addressing scheme utilized for your network. As for me, I use the 10. range of addresses with a 255.0.0.0 subnet. Once the IP address and Subnet Mask are plugged into the "Linksys Wireless-G WAP54G", configuration is complete, unless you want to change the name of the SSID (Service Set Identifier); default is "Linksys" or turn on encryption; default is "off."
After the configuration of the "Linksys Wireless-G WAP54G" was accomplished I queried it via the ping utility for the next hour just to ensure its continued operation. I then removed it from the hub, and using my spouses workstation (already equipped with a Linksys Wireless-G WMP54G PCI Card, see below for a link to my review of this product), I was able to connect at a full 54Mbps.

First Impressions:
I am impressed! I had read on Amazon.com & Buy.com via user reviews that some had problems communicating with the WAP after the installation process, and quite frankly this gave me pause, but not enough to forgo purchase of the unit. My reservations were unfounded; the "Linksys Wireless-G WAP54G" has thus far worked flawlessly.
Under real-world conditions, the "Linksys Wireless-G WAP54G" performance exceeds my expectations. So far I have been able to connect to the WAP from anywhere in the house; upstairs or down, at either a full 54Mbps or 36Mbps, and rarely 18Mbps. My laptop has consistently connected at a rate 54Mbps, and it is in the downstairs master bedroom! This comes in handy when I am perched in front of the television in the downstairs living room, but I am still able to surf the web and download files to and from my server and workstation on the second floor! And the signal strength drops off only marginally on the backyard patio; 36Mbps is the best I've been able to do, that is still markedly better then the 5.5Mbps I used the get with my other two WAP's. The Bard is a happy man!
The spouses Windows XP workstation, which is also downstairs just off the living room, connects to the "Linksys Wireless-G WAP54G" with a signal strength that fluctuates between ¾ and full, and a connection rate that floats between 54 - 48Mbps. As for my primary workstation in the upstairs loft; the signal strength is full at all times, and the connection rate is 54Mbps.
The "Linksys Wireless-G WAP54G" is capable of automatically downgrading its data transfer rate as the signal from the connected wireless clients becomes weaker, thus maintaining connection. When at the extreme range of the clients the "Linksys Wireless-G WAP54G" can downgrade as far as 1Mbps, which is still within acceptable limits for surfing the web and working with documents, but little else, but isn't nice that I do not have to worry about that.
Conclusion:
The "Linksys Wireless-G WAP54G" is a phenomenal product. Since installation I have yet to touch it; it just works and works well, but of course time will tell. The "Linksys Wireless-G WAP54G" represents the best of both worlds; it can meet your need for current 802.11b standards, but still has the flexibility to expand beyond to 54Mbps. Can you say no-brainer? I knew you could.


Click Here to see more reviews about: Linksys Wireless-G Access Point WAP54G - Wireless access point - Ethernet, Fast Ethernet - 802.11b/g

Wireless-G is the upcoming 54Mbps wireless networking standard that's almost five times faster than the widely deployed Wireless-B (802.11b) products found in homes, businesses, and public wireless hotspots around the country - but since they share the same 2.4GHz radio band, Wireless-G devices can also work with existing 11Mbps Wireless-B equipment.The Linksys Wireless-G Access Point lets you connect Wireless-G or Wireless-B devices to the network. Since both standards are built in, you can protect your investment in existing 802.11b infrastructure, and migrate your network clients to the screaming fast Wireless-G standard as your needs grow.To protect your data and privacy, the Wireless-G Access Point can encrypt all wireless transmissions. The MAC Address filter lets you decide exactly who has access to your wireless network. Configuration is a snap with the web browser-based configuration utility.Future-proof your wireless network with the Linksys Wireless-G Access Point. You'll enjoy Wireless-B connectivity today, and be prepared for a high-speed Wireless-G tomorrow.

Buy Now

Click here for more information about Linksys Wireless-G Access Point WAP54G - Wireless access point - Ethernet, Fast Ethernet - 802.11b/g

Read More...

Cisco-Linksys WET11 Wireless Ethernet Bridge Review

Cisco-Linksys WET11 Wireless Ethernet Bridge
Average Reviews:

(More customer reviews)
After reading the specs on the Linksys WET11 and downloading the user manual from their website, I decided to purchase a unit. I am very pleased with this product and it works as I had expected.
Setting it up was a breeze. The antenna is screwed on to the right side of the unit (which is surprisingly small). Plug in the power supply. I then hooked it up to a PC laptop with the supplied RJ45 cable and ran the setup program. I have an SMC Barricade 7004AWBR router with a built in wireless access point. The WET11 was configured to use the same SSID and channel as the SMC and then set to DHCP. All done.
The unit can then be connected to your ethernet device in one of two ways. One is directly to your desktop or laptop, for example. The other is to hook it up to a hub or switch and from there wire it up to one or more desktops or even laptops. There is a switch on the unit to select which mode will be used. While I do have a wireless card for the laptop, it's nice to have the flexibility of going wired for desktops.
The icing on the cake is that I now have wireless connectivity for my Mac Beige G3. I've been looking for a solution and the WET11 solves it. Before, I had to run a long RJ45 cable to it from the router. Now I can connect it to the WET11 through either of the two options mentioned and get on the web as before, except it's now wireless. One tip - set the Mac to a manual IP address. For some reason, setting the Mac for DHCP does not work. For me a very minor issue.
I have not seen any dropped connections for the few days I've had it and it sure runs cool. All in all, it has met my expectations, perhaps more so with the Mac. For the money, I see no comparable product out there. Check it out.

Click Here to see more reviews about: Cisco-Linksys WET11 Wireless Ethernet Bridge

The versatile wireless Ethernet bridge from Linksys can make any wired Ethernet-equipped device a part of your wireless network. At home, use the wireless Ethernet bridge to connect game consoles, set-top boxes, or computers to your wireless network to share your high-speed network connection. In the office, convert your Ethernet-wired printer, scanner, camera, notebook, or desktop into a wireless networked device.
It's completely driver-free, so it works on any platform and with any operating system. Because there are no drivers to load, setup is a snap--just plug it into your device and configure the network settings through your Web browser.
You can also use the Linksys wireless Ethernet bridge as a kind of "cableless cable" to connect remote areas together. Maybe the Shipping department is all the way across the warehouse from Receiving. Or maybe you want to set up a home office in your detached garage. With a wireless Ethernet bridge in the garage and an other one (or a wireless access point) in the house, you're connected--without the hassle of cabling.


Buy Now

Click here for more information about Cisco-Linksys WET11 Wireless Ethernet Bridge

Read More...

D-Link DWL-1000AP 11Mb Wireless LAN Access Point 802.11b Review

D-Link DWL-1000AP 11Mb Wireless LAN Access Point 802.11b
Average Reviews:

(More customer reviews)
Products Tested: D-Link DWL-1000AP 11Mb Wireless LAN Access Point 802.11b D-Link DWL-650 11Mb Wireless PCMCIA LAN Network Card 802.11b vs. Linksys WAP11 - Instant Wireless Network Access Point Linksys WPC11 - Instant Wireless Network PC Card
Computer Hardware: Laptop: Dell Inspiron 600mhz, W2k Network: NT 4.0 Server, W2K Server Switches: 3Com and Linksys
Quality: After working with dlink first, linksys blew away dlink on the feel of quality and workmanship. As we all know, these components are so miniaturized that they could put them into any light-weight enclosure. dlink chose the light packaging approach....feels "cheap." linksys chose the mid-weight package...you feel as if it has higher quality...and you got something for your $250-300! linksys chose the dual antenna design over the single on the dlink. Technically, I am not sure if it is better but the actual reception really is... These are subjective and personal factors but for most, it makes a difference.
Ease of Use: From the documentation, to the support, to the software, it is really apparent dlink cut costs everywhere and with things they shouldn't. The setup is extremely confusing, the software is buggy...really, and the docs are horrible. In my manual, every other page did not have printing on it...quality control missed this! Linksys...even though I had to use the USB setup at first (dlink does not have a USB port on their access unit), the configuration was simple. The docs actually explained the parameters on the configuration screens. Once I set the IP address to one recognized on my network (I am not using DHCP), I used the linksys SNMP configuration tool to set and adjust the other parameters. I have a laptop. When using the wireless network card on the dlink, if you eject the card, the next time you re-insert the card, it does not remember your setting. You have to go back and set the parameters in order to get the card to function again. I called dlink tech support on this...on hold forever, hung up, and no call back...even when they asked and I left my mobile number, just in case... On the linksys, when I re-inserted the wireless card, it remembered the setting.
Service and Usability: Both products have a signal and quality meter in their utilities. One important note...the distance specs on both of these products (I think the 802.11b category overall) are NOT accurate. Inside of your home and through walls, etc., expect much less. How much less...you need to try it out to be sure. If you have line of sight to the access unit, these distances will go up. I mounted the access unit in my living room, on top of the entertainment center. I chose this location b/c it had the best reception. With the dlink, in the master bedroom (through one wall!), I was *barely* able to use the network...0-40 on the signal meter. On one occasion, once the dlink card lost the network, I could not get back on?? The total distance to the access unit was 30ish feet. With linksys, my signal was consistent at 40-60...once or twice is dipped to 20-30 but came right back up. I also tried a configuration with the dlink access unit and linksys card. They did work together but I could not improve the signal quality. I concluded that the dlink access unit was one of the problems. When I used the dlink wireless card, several times my computer shut down automatically??
Overall: Save tons of time and money...just buy the linksys system...access point and cards. Linksys is priced well and makes a quality offering. It is very clear to me that dlink is just focused on price and cutting their cost.

Click Here to see more reviews about: D-Link DWL-1000AP 11Mb Wireless LAN Access Point 802.11b

The D-Link DWL-1000AP is an IEEE 8.02.11b-compliant, 11 Mbps wirelessEthernet access point designed for use in office and home environments. Itoperates in 2.4 GHz direct-sequence spread spectrum (DSSS), which providestransparent bridging and roaming capabilities to wireless nodes at ranges up to100 meters indoors and 300 meters outdoors. The DWL-1000AP supports Wired Equivalent Privacy (WEP), MAC address control, anduser authentication to ensure a secure network connection. When connected to anEthernet LAN, the DWL-1000AP automatically identifies the IP of the host PC aswell as the subnet. In addition, the IP address of the DWL-1000AP can bemanually assigned. The bandwidth data transmission rate can be set automaticallyusing the dynamic auto-sensing configuration or set manually to 11, 5.5, 2, or 1Mbps. You can manage the DWL-1000AP remotely with its access point manager software,which can be installed on Microsoft Windows 95 OSR2, 98, 98SE, NT 4.0, Me, and2000.

Buy NowGet 58% OFF

Click here for more information about D-Link DWL-1000AP 11Mb Wireless LAN Access Point 802.11b

Read More...

NETGEAR Wireless Digital Music Player Review

NETGEAR Wireless Digital Music Player
Average Reviews:

(More customer reviews)
Now that I have this set up it does exactly what I wanted it to very well -- that is, in a wired network environment, it streams all the mp3 files that I have on my PC's hard drive through my traditional two-channel audio setup. It has a number of limitations: it doesn't support Internet radio, except for a paid service, and it doesn't support various rights-protected data formats. But it does do the one thing I bought it for extremely well: allowing me to enjoy my entire music collection in an organized, well catalogued way, through my home audio system.
As this whole field of products is still pretty new, I also didn't want to spend more money on one of the more advanced systems -- it seems that the customer feedback on all of these media players remains pretty mixed. So I stuck with something relatively simple, and this little box does what I want for a reasonable price. (Previously I was using my iPod on a docking station, connected to my stereo...for the modest price of this Netgear player I've now liberated the iPod that previously was wired up to my stereo.)
A couple of cautions:
1. A lot of the customer problems cited here at Amazon seem to relate to problems with wireless transmission. I did not even try to set this up in a wireless network; I just hard-wired it into the network port I had installed in my living room. I have had a lot of frustration in my home w/wireless devices so finally just gave up and dropped in wiring for a home network while I was having other electrical work done in my house. I am glad I bit the bullet -- the wired network is saving me a lot of time and trouble. This Netgear product is just one example of the kinds of things that are very happy tethered to a wire that seem to be much more problematic when they are wireless.
2. Throw away the software disk that comes with the hardware -- don't install it!. Instead, download the new software and firmware that is on Netgear's site. I couldn't get this to work at all at first -- tech support advised me to uninstall the provided software, download the software update on their site, and start over. This got more complicated than it sounds because I'd already built a database of songs for the Netgear and I had to hunt down this database file and kill it, too...it got a little bit tricky...so it took me a couple of hours in all to get this fixed. Had I started with the new software posted on Netgear's site, I would have had the whole thing done in 20 minutes. In any case, just go right to netgear's site and download their new software, and don't use the junk they ship with the product.
I also found netgear's tech support to be very, very good -- they answered the phone quickly (on Christmas Eve!) and were extremely helpful and patient.

Click Here to see more reviews about: NETGEAR Wireless Digital Music Player

NETGEAR's Wireless Digital Music Player lets you enjoy your digital music files stored on your computers and unlimited, worldwide Internet radio with your friends and family throughout your home. It connects your existing home stereo to your home computer network so you can listen to the digital music collection from any PC on your home stereo system. You can also listen to music directly from a 30,000 track digital jukebox using the RHPSODY¿ service (only available in U.S.) or hear thousands of Internet radio stations even when your PCs are turned off. Easy-to-install software on one PC automatically finds all your music files on any networked PC and collects them into one complete database. The remote control and stylish user interface let you sit on the couch and wirelessly stream MP3s or Windows Media format files from any PC on your home network straight to your stereo! The MP101 supports many PC operating systems, not just Windows XP, and the LCD display means you don't need to turn on your TV when you want to listen to music.

Buy Now

Click here for more information about NETGEAR Wireless Digital Music Player

Read More...

Cisco-Linksys WET54G Wireless-G Ethernet Bridge Review

Cisco-Linksys WET54G Wireless-G Ethernet Bridge
Average Reviews:

(More customer reviews)
If you are considering this bridge to do video/audio streaming inside your house, think again. This review is based on over 2 months worth of testing this unit and then working with Linksys/Cisco trying to figure why it does not deliver. A saleperson at a local store may have told you that you can stream MP3s over your wireless network, or perhaps you have two DVRs in your house and your want to stream recorded TV shows from one to another. This is not the device you want to use for this purpose. Don't belive me? Ask Linksys level 3 support. Its architecture is not designed to support high levels of network traffic needed for streaming -- it has very small or zero I/O buffers to handle it -- as a result, the device will crash after 2-5 minutes of streaming. You can power cycle it and it will resume for the next 2-5 min. But forget streaming for a moment, WET54G crashed when I was simply working from home VPN'd into my company. Not for that either?! Do you think that WET54G ver 2 is better than WET54G ver 1? Been there, don't waste your time -- the architecture is the same. Alternatives? WET54GS5 might be better, but I'm yet to find that out myself. I know you want to try it yourself. Piece of advice -- buy at a retail store, and if it doesn't work, return within 30 days. Do not get into RMA exchanges with Linksys - unless you enjoy 2 months of 2-3 hours/day trying to get your money back.

Click Here to see more reviews about: Cisco-Linksys WET54G Wireless-G Ethernet Bridge

Connect any Ethernet-equipped device to a high-speed Wireless-G Network The versatile Wireless-G Ethernet Bridge can make any wired Ethernet-equipped device a part of your wireless network. At home, use the Bridge to connect game consoles, set-top boxes, or computers to your Wireless-G network and its shared high-speed Internet connection. In the office, convert your Ethernet-wired printer, scanner, camera, notebook or desktop into a wireless networked device. Its completely driver-free, so it works on any platform and under any operating system Since theres no drivers to load, setup is a snap -- configure the network settings through your PCs web browser, then plug it into your device and go. And physical installation is simplified by support for Power Over Ethernet. With an optional POE Adapter, you can mount the Bridge wherever you want -- power and data are both supplied through the Category 5 Ethernet cable.

Buy Now

Click here for more information about Cisco-Linksys WET54G Wireless-G Ethernet Bridge

Read More...