Showing posts with label access points. Show all posts
Showing posts with label access points. Show all posts

Cisco-Linksys WAP51AB Wireless Dual Band Access Point (802.11a + 802.11b) Review

Cisco-Linksys WAP51AB Wireless Dual Band Access Point (802.11a + 802.11b)
Average Reviews:

(More customer reviews)
The product works great! I have it in my basement and I can roam with my laptop to any room in the house and the performance is excellent!
Someone should be experienced in networking to fully take adavantage of the products features but the "step-by-step" guide would allow a novice to set it up just the same.

Click Here to see more reviews about: Cisco-Linksys WAP51AB Wireless Dual Band Access Point (802.11a + 802.11b)

Install an access point that protects your infrastructure investment without limiting you to a single type of wireless technology. The Linksys Instant Wireless dual-band wireless access point works simultaneously with both 802.11a and 802.11b wireless standards to bring you the ultimate in wireless freedom. This means you can enjoy the broadest spectrum of wireless networking without the worry of a costly upgrade later.
The dual-band wireless access point's high-powered antennas enhance reception and provide seamless roaming throughout your wireless network. An advanced user-authentication feature and security encryption of up to 152 bits give you the highest level of network security. It's easy to install and easy to use. With Internet browser-based diagnostics and a setup wizard, you're always in control.
Compact, lightweight, and power-efficient, the Instant Wireless dual-band wireless access point from Linksys is the perfect wireless networking solution, no matter which wireless networking standard you choose to use.
For more information on the differences between an Access Point and a Router with Access Point, see the following table:

Buy NowGet 19% OFF

Click here for more information about Cisco-Linksys WAP51AB Wireless Dual Band Access Point (802.11a + 802.11b)

Read More...

Netgear WAG302NA WAG302.PROSAFE 11ABG Dual Band Wireless Access Point Review

Netgear WAG302NA WAG302.PROSAFE 11ABG Dual Band Wireless Access Point
Average Reviews:

(More customer reviews)
I bought three of these and have been struggling with them for 6 weeks. One day it all works great, the next there are many dropped connections ot you can authenticate with only one device at a time: I'm using all static IP's with WPA/PSK TKIP. Even when authenticated and connected with good signal cannot reach the LAN, cannot ping anything.
The tech support is dysfunctional: on hold repeatedly, never getting a resolution. One "escalated" case took 4 weeks to get an answer and the answer is that the WAG302 is NOT COMPATIBLE WITH WINDOWS CE 5.0 WIRELESS DEVICES! Well, be advised, it works no better with laptops and desktops.
If you have a lot of time on your hands, then try it out. I mean a lot of time.

Click Here to see more reviews about: Netgear WAG302NA WAG302.PROSAFE 11ABG Dual Band Wireless Access Point

PROSAFE DUAL BAND WLS AP 802.11A/B/G WAG302

Buy Now

Click here for more information about Netgear WAG302NA WAG302.PROSAFE 11ABG Dual Band Wireless Access Point

Read More...

Wireless G Access Point with Srx (speed and Range Expansion) Review

Wireless G Access Point with Srx (speed and Range Expansion)
Average Reviews:

(More customer reviews)
This wireless access point worked well for about 2 months, but then it started to turn itself off & on sporadically. LinkSys tech support tells me that this is a normal behavior -- the unit might work for 1 hour, and then off for the next few hours, then again, on & off. I thought they would just replace the unit (since it is under warranty), but they wouldn't... they transfer instead to their technical support in India or Philippines... & would not replace the device saying that "when it doesn't work, it is a normal behavior..."

Click Here to see more reviews about: Wireless G Access Point with Srx (speed and Range Expansion)

The Linksys Wireless-G Access Point with SRX is the best way to add wireless capability to your existing home or small office network.
The Linksys Wireless-G Access Point with SRX lets you connect Wireless-G (802.11g), Wireless-B (802.11b), and new SRX-enhanced devices to your wired network so you can add PCs to the network without the cabling hassle. Create a "wireless bubble" in that hard-to-wire home or office space, and save the time, hassle, and expense of running cables. Plus, notebook PCs can travel around your home or office and stay connected wherever they go. The Wireless-G Access Point with SRX combines smart antenna technology with standards-based Wireless-G (802.11g) networking. By overlaying the signals of two Wireless-G compatible radios, the "Multiple In, Multiple Out" (MIMO) technology effectively doubles the data rate. And unlike ordinary wireless networking technologies that are confused by signal reflections, MIMO actually uses these reflections to increase the range and reduce "dead spots" in the wireless coverage area. The robust signal travels farther, maintaining wireless connections up to 3 times farther than standard Wireless-G. And the farther away you are, the more advantage you get -- the higher data rate and reflection-friendly technology can yield up to 8 times more throughput than Wireless-G in some situations. The access point avoids interference by dynamically switching to the clearest channel available. Even your standard Wireless-G and -B equipment will work better when communicating with an SRX-enabled access point.
Wi-Fi Protected Access (WPA/WPA2) protects your data and privacy with up to 128-bit industrial-strength encryption. You can use the MAC Address filter to decide exactly who has access to your wireless network.

Buy Now

Click here for more information about Wireless G Access Point with Srx (speed and Range Expansion)

Read More...

Cisco-Linksys WAP55AG Dual-Band Wireless A+G Access Point Review

Cisco-Linksys WAP55AG Dual-Band Wireless A+G Access Point
Average Reviews:

(More customer reviews)
The WAP55AG was so easy to setup. Compared to past Linksys access points, there was no need for software installation as XP can determine configuration automatically. My Dell laptop could instantaneously identify the proper frequency and establish a link. Recently, I bought a second unit for my office and my laptop automatically connects at home or at work without any hassle whatsoever.

Click Here to see more reviews about: Cisco-Linksys WAP55AG Dual-Band Wireless A+G Access Point

Linksys Dual-Band Wireless A+G Access Point WAP55AG - Wireless access point - EN, Fast EN, 802.11b, 802.11a, 802.11g

Buy Now

Click here for more information about Cisco-Linksys WAP55AG Dual-Band Wireless A+G Access Point

Read More...

Netgear ANT24D18 14Dbi Antenna Review

Netgear ANT24D18 14Dbi Antenna
Average Reviews:

(More customer reviews)
I bought this to use w/ a Netgear WG302 v2. The most important thing to know in advance is that it does NOT come w/ a cable to attach to the wireless access point. Netgear recommends using any of its own branded antenna cables, and this is what I did. I am using the 5m cable (ACC 10314-03) and it works.
However, I found that the WG302 with this antenna has provides less coverage for my 2 story colonial house than a Netgear WPN802 v1. I set the WPN802 into repeater mode and use the WG302 with this antenna as the access point. This arrangement works for me.

Click Here to see more reviews about: Netgear ANT24D18 14Dbi Antenna

Netgear 14Dbi Antenna

Buy NowGet 12% OFF

Click here for more information about Netgear ANT24D18 14Dbi Antenna

Read More...

Wireless 7760 11 A/b/g Poe Access Point Review

Wireless 7760 11 A/b/g Poe Access Point
Average Reviews:

(More customer reviews)
For what I paid, I was seriously expecting an industrial-strength access point with a solid range. I have used other 3Com access points such as the 8250 in larger environments with desired results, but this one doesn't measure up AT ALL. I mounted it centrally about 7 feet up a wall, tried different antennas, different physical locations, different software settings, firmware upgrades, etc, but my cheap crappy netgear consumer wireless router gets better range, and from farther away will generate a better signal than this 3Com.
Sorely disappointed.

Click Here to see more reviews about: Wireless 7760 11 A/b/g Poe Access Point

IEEE 802.11a/b/g - 108Mbps - Wireless Access Point

Buy NowGet 22% OFF

Click here for more information about Wireless 7760 11 A/b/g Poe Access Point

Read More...

NETGEAR WN802T RangeMax Next Wireless-N Access Point Gigabit Edition Review

NETGEAR WN802T RangeMax Next Wireless-N Access Point Gigabit Edition
Average Reviews:

(More customer reviews)
My husband has a computer business and has purchased 5 of these devices for various customers. Each and every one of them have failed. Three of them within the 3 months Netgear will provide free support for and two of them after 1 year.
When they work they don't work so well, a lot of disconnects, and network not found. Working with support stated that too many wireless networks in a congested area will cause this. Understandable, but hardware failures are not understandable.
Out of the five of them, Netgear has replaced the three that failed withing the 90 period and they have been taken out of service since then. There were too many network disconnects to be useful.
When they fail the power light comes on, but nothing else. No network light when the cat5 cable is plugged into it, nor does the wireless work on the device either.
My husband made the mistake of purchasing them when they were fairly new and paid over 170.00 per. What a mistake. DO NOT PURCHASE THIS AS IT IS JUNK.

Click Here to see more reviews about: NETGEAR WN802T RangeMax Next Wireless-N Access Point Gigabit Edition

The NETGEAR WN802T RangeMax Next Wireless-N Access Point Gigabit Edition lets you easily set up a wireless network in your home so you can share a single internet connection with everyone in your household at speeds up to 300 Mbps. You can stream music and video, make internet phone calls, videoconference, and surf the web, all at the same time.
Easy Setup The WN802T makes it easy for even a novice to set up a wireless network: just plug the included Ethernet cable from your LAN into the device and insert the included CD into any computer on the network, which will provide step-by-step instructions. The WN802T offers a myriad of placement options by including a stand for vertical placement and also a wall-mount kit.
The WN802T employs a web-based interface for configuration for compatibility with any computer with a web browser. The firmware is also upgradeable via the web interface so you can be sure your access point will always be up-to-date.
New Technology Means Blazing Speeds and Backwards Compatibility The WN802T complies with the latest 802.11n draft specification which allows for speeds up to 300 Mbps; this maximum speed can be achieved when used with other TopDog devices. By utilizing MIMO (multiple-input, multiple-output) technology, the WN802T has speed and range far surpassing the older 802.11g standard. The preset antennas in the access point ensure that the device is always tuned for optimal performance, and NETGEAR's Wi-Fi Multimedia technology optimizes audio, video, and voice applications.
By using Gigabit Ethernet for the backend, you'll be certain that the access point is receiving data at the highest possible speeds, ensuring the 300 Mbps wireless throughput is not going to waste.
If you still have computers that use 802.11g or 802.11b, don't fret as the access point is backwards compatible with the older wireless standards and can be set so all your computers can connect to the network. The access point will automatically figure out the connection type and work accordingly.
Security Made Easy NETGEAR's Touchless WiFi Security makes it quick and easy to set up network security on a WiFi network by asking for a passphrase from the user. The WN802T supports WiFi Protected Access (WPA2-PSK, WPA-PSK), and 64-bit and 128-bit WEP encryption for 802.11b/g networks. Additionally, you can set security through MAC address authentication, allowing only authorized users onto the network. There is also support for 802.1x RADIUS support with EAP TLS, TTLS, and PEAP.
The NETGEAR WN802T RangeMax Next Wireless-N Access Point Gigabit Edition is backed by a 1-year warranty.
What's in the Box WN802T RangeMax Next Wireless-N Access Point, power adapter, Ethernet cable, stand, wall-mount kit, resource CD, installation guide, warranty/support information card.

Buy NowGet 17% OFF

Click here for more information about NETGEAR WN802T RangeMax Next Wireless-N Access Point Gigabit Edition

Read More...

Cisco Aironet 350 Series 11Mbps Wireless LAN PC Card Adapter ( AIR-PCM352 ) Review

Cisco Aironet 350 Series 11Mbps Wireless LAN PC Card Adapter ( AIR-PCM352 )
Average Reviews:

(More customer reviews)
I manage the wlan at work and test numerous cards. The Cisco 350 series is what we rolled of company wide for for employee use. The Client software (ACU) included with the card is straight forward and provides great info on the current connection and link status.
One thing you can do with this card that you can't with others is modify the transmit power for the card. The primary difference between the Cisco 340 and 350 series is the transmit power. On the 350 you can change this from 1mw to 100mw (the 340 series peaks at 30mw). This feature is especially handy, especially when taking my laptop from work to home (you just don't need 100mw of transmit power in a 1200 ft. apartment).
The hardware is great (Cisco acquired Aironet around 97 I think), the software is intuitive, and is fully compatible with many authentication methods other than wep (i.e., TLS, MD5, EAP, LEAP).
So why did I give this card a 4 star rating instead of 5 stars? Three reasons:
Client side software does not roam between discontiguous networks when using advanced authentication
Client side software does not include any kind of sniff feature to see what wireless networks are within range. I have to use third party software for that.
Cisco cards do not do true rfmon passive packet acquisition. Cisco (and I think Lucent) diverged from the prism 2 chip , so i keep my Cisco card for work and keep a linksys wpc11 (prism2 chipset) for "network analysis".
Hope this helps. Peace to all wifi junkies out there.

Click Here to see more reviews about: Cisco Aironet 350 Series 11Mbps Wireless LAN PC Card Adapter ( AIR-PCM352 )

IEEE 802.11b 11Mbps wireles DSSS Type II PC Card adapter, 128-bit WEP

Buy Now

Click here for more information about Cisco Aironet 350 Series 11Mbps Wireless LAN PC Card Adapter ( AIR-PCM352 )

Read More...

Linksys by Cisco WAP4400N Wireless-N Access Point - PoE Review

Linksys by Cisco WAP4400N Wireless-N Access Point - PoE
Average Reviews:

(More customer reviews)
I read the prior reviews but went ahead and bought this on the advise of a friend who intalls wireless networks for a living and he uses this access point a lot. I am completly pleased with this Linksys product. When you plan to use it for what it is designed for, an Access point, and don't have any notions that it is anything more, it chugs right along. I ran CAT 6 cable, (keeping under 300 meters total length) and used the AC adaptor supplied to power the unit. It is ran off a Linksys wireless-N router and a 5 station Linksys Workgroup hub. I mounted it in the downstairs coat closet behind my TV room and turned on my laptop, found it, and connected. I then entered it's webbased setup utility and configured it to my liking, (WPA2 security to match my wireless router) and I works like a charm. I am writing this review on my laptop, in my bedroom, where my upstairs router alone could never reach. I now have full bar service all over my complete property, inside and out. It is just what was needed.

Click Here to see more reviews about: Linksys by Cisco WAP4400N Wireless-N Access Point - PoE

With the growth in high bandwidth applications, such as storage and video in the work place, network performance is essential. Wireless technology is no longer lagging behind wired performance. The Linksys Business Series WAP4400N Wireless-N Access Point answers your growing business' need for access, speed and security. Using the very latest wireless networking technology, Wireless-N (draft 802.11n), Multiple In, Multiple Out (MIMO) technology multiplies the effective data rate by overlaying the signals of multiple radios. The Linksys Wireless-N Access Point lets you connect Wireless-N (802.11n), Wireless-G (802.11g) or Wireless-B (802.11b) devices to your wired network so you can add PCs to the network with no cabling hassle. Power over Ethernet (PoE) support makes the Access Point easy to install. You can mount the Access Point anywhere, even without ready access to a power plug. With appropriate PoE support at the other end, you only need to run one cable to the Access Point to deliver both data and power. Operating Channels -11 North America, 13 Most of Europe (ETSI and Japan) Receiver Sensitivity -11.n 300Mbps at -69dbM, 11.g 54Mbps at -73dBm, 11.b 11Mbps at -88dBM Security -WEP/WPA/WPA2 WEP 64bit/128bit, WPA-PSK, WPA2-PSK, WPA-ENT, WPA2-ENT Linux Operating System System Requirements -802.11b, 802.11g, 802.11n Wireless Adapter With TCP/IP Protocol Installed Per PC, Switch/Router with Power Over Ethernet (PoE) Support Or PoE Injector when used with PoE & Web-Based Configuration Java-Enabled Web Browser Dimensions -Width 7.80 x Height 5.16 x Depth 7.80-inches (198 x 131 x 198 mm) Weight -0.84 pounds (38 grams)Please note: A new firmware, which resolves wireless connectivity issues and other known bugs, has been released on www.linksys.com.

Buy Now

Click here for more information about Linksys by Cisco WAP4400N Wireless-N Access Point - PoE

Read More...

Ayrstone AyrMesh Hub Review

Ayrstone AyrMesh Hub
Average Reviews:

(More customer reviews)
Purchased this Wireless product and it took some doing placing the antenna on a roof mast and routing the cable down to connect to my office router. So when I got the Internet Signal at our cabin in the trees about a quarter mile away it was truly a rewarding experience.
Despite a clause in the Terms & Conditions for service fees, I was assured by the owner that this was intended for future products and not for the Ayre-Mesh Hub System.
Product Support is excellent and available quickly with some real congenial folks.
Forgot to purchase the cable necessary to mount the antenna so that delayed things a bit, and I have to check into lightening rods and protecting my computer from an errant lightening bolt strike, but guess it comes with the territory.
Another great feature is the ability to separate my home/office network from the public use easily by creating a separate name for the public network.
All in all a satisfying and cost effective solution to extending rural networks.

Click Here to see more reviews about: Ayrstone AyrMesh Hub

The AyrMesh Hub is the "building block" for the AyrMesh network. The first AyrMesh Hub (called the "Gateway") is connected to your existing high-speed internet connection (router) and distributes it via Wi-Fi up to half a mile away. Additional AyrMesh Hubs (called "Remotes") can then be deployed as to extend your network even further. All AyrMesh Hubs are automatically self-configuring using information from the AyrMesh Portal. If you are ordering the AyrMesh Hub as a Gateway (the first AyrMesh Hub, connected to your router) or you need to mount it further from your power outlet, make sure you order an Ethernet cable (or make your own Ethernet cable) long enough to reach from where it is mounted to the power supply. AVAILABLE IN THE U.S. AND CANADA ONLY - $10 EXTRA CHARGE TO SHIP TO P.O. BOXES

Buy Now

Click here for more information about Ayrstone AyrMesh Hub

Read More...

3COM Wireless 8760 11A/B/G Poe Access Review

3COM Wireless 8760 11A/B/G Poe Access
Average Reviews:

(More customer reviews)
We have several of these in our office. They work well for Windows PCs, but Macs and iPod Touch/iPhones have trouble connecting to them reliably, even with the latest firmware. I'd go with some other brand if you have to support Apple equipment. 3Com does have a handy Windows program for discovering and configuring these things, and their web config interface is pretty good as those things go.


Click Here to see more reviews about: 3COM Wireless 8760 11A/B/G Poe Access

WLS AP 8760 802.11A/B/G POE

Buy Now

Click here for more information about 3COM Wireless 8760 11A/B/G Poe Access

Read More...

D-Link DWL-7100AP Wireless Access Point w/SNMP, 802.11a/g, 108Mbps Review

D-Link DWL-7100AP Wireless Access Point w/SNMP, 802.11a/g, 108Mbps
Average Reviews:

(More customer reviews)
It had the latest firmware and wireless protocols installed, and the web-based configuration interface has well organized pages of setup options. The Help pages are actually helpful. As with any networking device it is good to be a little familiar with TCP/IP so you can handle minor annoyances like giving your computer a temporary static IP address in the same subnet range as the DWL-7100AP so you can communicate with it during configuration (This is explained in the manual). Afterwards, I was able to change my computer back to dynamic IP addressing, and still access the configuration pages of the DWL-7100AP. It will work just fine right out of the box with default settings, but as with any wireless access point, better security can be had by creating your own SSID name, disabling broadcast of the SSID, changing the default user ID and password, using MAC filtering so that only your computers will be accepted by the access point, and enabling data encryption. The DWL-7100AP allows you to use two kinds of WPA encryption, which is much more secure than WEP. I highly recommend this product and it's well-written manual. Some users report having their connection dropped frequently. I found that interference from 2.4 Gigahertz portable telephones in my house was the culprit for dropped connections on the 802.11g band, which is in the same frequency band as the phones. Since I switched to the 802.11a band (5 Gigahertz) I very seldom have dropped connections from the DWL-7100AP.

Click Here to see more reviews about: D-Link DWL-7100AP Wireless Access Point w/SNMP, 802.11a/g, 108Mbps

D-Link, the networking industry leader, delivers another innovative and versatile solution in wireless connectivity with the D-Link AirPremierTM DWL-7100AP Wireless Access Point. This dual-band (2.4GHz, 5GHz), tri-mode (802.11a, b, g) Access Point provides the most bandwidth coverage available in an AP. Multiple wireless clients can connect to the DWL-7100AP using both A and G wireless standards and any of its 11 non-overlapping channels to transfer data at speeds of up to 108 Mbps. Network Administrators can easily integrate various wireless managements with the DWL-7100AP Wireless Distribution System (WDS), offering modes in AP, Point-to-Point Bridge, Point-to-Multipoint Bridges, AP Client, and Repeater, allowing users to gain controls beyond a sole AP.

Buy Now

Click here for more information about D-Link DWL-7100AP Wireless Access Point w/SNMP, 802.11a/g, 108Mbps

Read More...

Apple MA073LL/A AirPort Extreme Base Station Review

Apple MA073LL/A AirPort Extreme Base Station
Average Reviews:

(More customer reviews)
I have been using many wireless routers (Linksys, D-Link, SMC, Netgear, Siemens...) over the years, since the early days of 802.11b, but this is my first experience with an Apple router.
There is no need to comment on the manufacturing quality, design and packaging: in typical Apple fashion, they're miles ahead of the competition. For instance, unlike all the other routers I ever used that came with a 110v only power supply, the Airport Extreme Base Station (AEBS for short) comes with a universal worldwide power supply equipped with a standard power cord.
Performancewise, it is exceptional. I have been putting it through its paces over the past few days and it's barely breaking a sweat in situations where my previous routers (Linksys WRT54G and Netgear WGN824) would progressively get slower, or just plain crash and require a reboot. Coverage is excellent, better than my WGN824's which was already quite impressive.
Apple has traditionally be doing things differently, and it shows here again: unlike most routers, which are managed by accessing a built-in web server, this router can only be configured using the "Airport Utility" configuration program. The bundled CD contains a Mac OS X and a Windows version of the utility (I can already hear groans from the Linux geeks). The utility is extremely simple to use, although I haven't tried to use the more advanced features such as setting up another router like the Airport Express as a range extender.
One problem you might run into is the lack of support for "legacy" devices: although the AEBS offers a compatibility mode with WEP devices called "WEP (Transitional)" which lets WEP and WPA coexist, this mode imposes restrictions on the keys that may not work for you (for instance you won't be able to reuse an existing 40-bit WEP key). The problem is that WEP-40 and WEP-128 are not compatible with the 802.11n standard, so you have to choose between speed or full backwards compatibility. Also, you should know that WEP-40 and WEP-128 are not very secure: there are utilities out there that can crack these keys easily.
Note that 802.11n gives a significant speed boost to the AppleTV and laptops equipped with compatible cards (such as Apple's Core 2 Duo laptops with the 802.11n enabler installed -- you can find the enabler on the AEBS CD). Unless you own one of these machines, there is no harm in switching to a non-802.11n radio mode. How? Just hold the command key (or control on Windows) while clicking on the "Radio Mode" popup in the Wireless tab of the AEBS configuration utility. Extra, non-n modes appear in the list, and once one is selected the WEP-40 and WEP-128 modes become available under Security. If you select WEP-40 or WEP-128 security, you can enter a hex key by prefixing it with a dollar sign.
The AEBS also comes with a versatile USB port, which can be used to attach hard disks and/or a printer (USB hubs are supported). Unlike other base stations or NAS boxes, the AEBS does not require that you reformat the disk; all you have to do is plug it in and voilà! Instant NAS, all your files show up on the network. Some very basic access control features are provided. I plugged in the external USB drive I use to backup my MacBook, and now I can do automated backups without having to worry about remembering to plug in the drive: it just works wirelessly. The AEBS also lets you share a USB printer.
In conclusion, this router is a fantastic performer. Although it's one of the most expensive 802.11n routers out there, its feature set, build quality, performance and top-notch customer support more than make up for the price difference. I recommend it highly.

Click Here to see more reviews about: Apple MA073LL/A AirPort Extreme Base Station

Apple has updated its highly rated wireless router with faster speed, twice the range, a lower price, and wrapped it all up in a whole new design. The new AirPort Extreme Base Station now has extra Ethernet ports for making wired computer connections and/or sharing network printers. It even has a USBslot, for connecting a USB printer, external hard drive, or other USB device. Also, it works with both Mac and Windows machines.
About 802.11n AirPort Extreme Base Station is compatible with the 802.11n draft specification, the new, all-but-finalized (as of February, 2007) standard for wireless networking, or Wi-Fi. Apple says their 802.11n is up to five times faster than the currently ubiquitous 802.11g. It uses three discreet antennas that not only double its range over previous AirPort base stations, but allows up to 50 simultaneous connections. Unless you're an office manager, school principal or a cafe owner, you probably don't care about that much capacity. Still, it's nice to know you can, say, telecommute over the Internet while someone else in your household is streaming video without slowing each other down. Thankfully, AirPort Extreme is backward compatible with 802.11a/b/g devices. Apple does caution, however, that "speed and range will be less if an 802.11a/b/g product joins the network."

And while setting up a Wi-Fi network in your home can often be a confusing, frustrating experience, consumers have learned that Apple is adept at painlessly guiding even novice users quickly through a set-up process. Apple promises that their wizard will have you up, running, and secure in the time it takes to brew a cup of coffee. It offers WPA/WPA2 and 128-bit WEP encryption, as well as a built-in firewall, which helps protect you from Internet intruders.


Sharing Features One of the most interesting features of the new AirPort Extreme Base Station is its ability to turn almost any external USB hard drive into a network attached storage (NAS) device. Just plug the disk directly into the AirPort Extreme Base Station's USB port, and it will be accessible through the built-in file sharing capabilities of both Windows and OS X. The AirPort Disk Utility software helps you set up permissions and passwords, keeping the disk (or parts of it) inaccessible from others on your network. You can similarly turn a standard USB printer into a network printer. The AirPort Extreme Base Station only has one USB port, but you will be able to plug both of those devices and more in by using a separately sold USB hub. Like most wireless routers, AirPort Extreme Base Station lets you create a list of devices allowed to access your network. A new parental control feature in this router, though, lets you lock out specific devices, like a kid's computer, from connecting during certain hours of the day, such as after bed-time.

What's in the Box Apple MA073LL/A AirPort Extreme Base Station, AirPort Utility for Mac and Windows, AirPort Disk Utility for Mac and Windows, 802.11n Enabler for Mac, Bonjour for Windows, power cord, printed and electronic documentation.


Buy Now

Click here for more information about Apple MA073LL/A AirPort Extreme Base Station

Read More...

D-Link DI-713P Wireless Broadband Router and Access Point with 3-Port Switch Review

D-Link DI-713P Wireless Broadband Router and Access Point with 3-Port Switch
Average Reviews:

(More customer reviews)
Pros: reasonable price; three ports for wired connections; reasonably simple administration procedures and usable interface; integrated print server (parallel connector)
Cons: no support for bi-directional communications with my HP LaserJet 1200se (e.g., it no longer tells me I'm out of paper, etc.).
After scouring the Web for insight and equipment reviews (the PracticallyNetworked site was especially helpful) of the myriad of router options, I decided on this one from D-Link. My housemate and I needed to share our newly installed cable Internet service in our three-story house, so wireless seemed like the easiest option. I put the router in my office on the second floor, and he has no trouble accessing the Net by laptop from his office on the first floor, and I can usually get 500+ Kbps (on a PII-333 laptop running a NetGear PC card) in the living room on the third floor. 2Wire's bandwidth meter clocks about a 1.5 Mbps connection for my P4-1.2 wired directly to the router.
I haven't had to call D-Link for tech support, so I can't speak to their abilities/response time. I did use their Web site to download a firmware upgrade. All told, I had our wireless net up and running in less than an hour (which also included a call into RCN to get them to tweak our cable modem on their end).
One thing to bear in mind: pick access clients that are solid performers, whether they're PC card or USB devices. Routers like this are only the access point portion of the wireless equation -- speed and range can be easily hobbled by anemic clients that can't hold up their end of the bargain.

Click Here to see more reviews about: D-Link DI-713P Wireless Broadband Router and Access Point with 3-Port Switch

The D-Link DI-713P is a broadband IEEE 802.11b compliant wireless gateway. It provides the ability to share a broadband connection as well as a print server function. You can share a DSL or cable modem connection through its three local 10/100 Ethernet ports or via its integrated Wireless IEEE 802.11b component. The DI-713P is equipped with a bidirectional LPT port to support a direct printer connection. Its integrated router and firewall provide NAT, DHCP, and packet filtering services between the local network and the Internet.
D-Link's DI-713P allows wireless LAN users to share the Internet connection while providing the security of 128-bit encryption. Static address support, integrated DHCP, PPPoE, and device name support will allow it to connect to nearly any broadband provider, whether cable or DSL based, and at the same time simplify local area network settings.
The DI-713P provides two levels of security support. First, it masks local users' IP addresses from others on the Internet, making it much more difficult for a hacker to target a machine on the network. Second, it can block and redirect certain ports to limit the services that outside users can access. Specific ports can be opened by the user to ensure that games and other Internet applications will run properly.
The router and access point combo also provides special pass-through for common VPN implementations including PPTP (Point to Point Tunneling Protocol), L2TP (Layer 2 Tunneling Protocol) and IPSec*. The Virtual Server feature allows the user to expose HTTP, FTP, Game Servers, and other local services to be accessible to Internet users located outside the LAN. The User-Definable Application Sensing Tunnel feature allows the user to define the attributes to support special applications requiring multiple connections, such as Internet gaming, video conferencing, and Internet telephony. A DMZ setting can be applied to a single client behind the DI-713P to expose it to the Internet and ensure complete Internet application compatibility, even if specific ports are not known.
Unlike proxy server or NAT software that requires the software server to remain visible on the Internet, no local computers are directly externally visible when using the DI-713P. Also, the DI-713P, like broadband, is always on, removing the need to constantly boot a software server when Internet access is desired from a client.
Integrated DHCP services allow up to 252 users to obtain their IP address automatically on bootup from the DI-713P. Client machines require no software; simply set them to accept a dynamically assigned IP address and reboot. Each time they are powered up, the DI-713P will recognize them and set their IP address to instantly connect them to the LAN.
* PPTP, L2TP, and IPSec support compatibility are dependent on the platform used.

Buy Now

Click here for more information about D-Link DI-713P Wireless Broadband Router and Access Point with 3-Port Switch

Read More...

NETGEAR WPN802 RangeMax Wireless Access Point Review

NETGEAR WPN802 RangeMax Wireless Access Point
Average Reviews:

(More customer reviews)
Previous dead spots in my house are gone - replaced with 80+% signal strength and high speed. I was using a Netgear FWAG114 (dual-band b/g) but it couldn't reach everywhere. I have the WPN802 on the top floor of my house in a corner and it reaches everywhere without exception, even my backyard sitting on my porch at the opposite end of the house - which I couldn't do before.
Installation note: by default DHCP is not enabled - you have to perform the initial setup by setting the IP address on your PC and plugging it directly into the unit first - awkward - but it does work as the manual instructs you to do. Some people have complained about the blinking blue rotating lights on the top from the antennaes (who doesn't like blinking blue lights!), anyway, there is a cap (think of a pirate's eye patch without the head band) that fits over the lights if they bother you. Excellent - highly recommended.

Click Here to see more reviews about: NETGEAR WPN802 RangeMax Wireless Access Point

"With NETGEAR’S RangeMax Wireless Access Point (WPN802) dead spots become a thing of the past.Customers will enjoy high speed Internet access everywhere in their homes – not just when they are situated close to their wireless access point.RangeMax uses MIMO (Multi-In, Multi-Out) smart antenna technology to delivers up to 10 times** more wireless coverage and speed than standard 802.11g devices when used with a NETGEAR RangeMax wireless client, yet is fully compatible.Also compatible and provides enhanced performance for IEEE 802.11b and Super G™ wireless client adapters.There’s no need to worry about unauthorized use of your network. Your RangeMax Wireless Access Point offers the safety 64-bit Wired Equivalent Privacy (WEP) technology with 128-bit encryption, as well as Wi-Fi Protected Access (WPA), Pre-Shared Key technology, Wireless MAC address authentication and VPN tunnel pass-thru.Smart Wizard™ guides you through easy installation and setup. Just plug the WPN802 into your existing router andyou can instantly allows share a wireless Internet connection. The WPN802 is backed by Netgear’s 1-year warranty."

Buy Now

Click here for more information about NETGEAR WPN802 RangeMax Wireless Access Point

Read More...

TRENDnet 14dBi High Power Wireless Outdoor PoE Access Point TEW-455APBO (White) Review

TRENDnet 14dBi High Power Wireless Outdoor PoE Access Point TEW-455APBO (White)
Average Reviews:

(More customer reviews)
I purchased 2 of these units to setup WiFi for a mountain condo building (3 floors by 5 units). Both units are mounted on opposites end of the building on the top (3rd) floor. Setup was relatively easy (maybe not if a first timer). The one time I had a question for Trendnet (prior to purchase) their response was prompt and helpful. Units are attached to a DSL modem/router. Since we can only get 7MB DSL service I have limited the APs to 11b. So can't comment on higher speeds. So far all units are reporting good service.
These units are hard to beat for the price. Not as powerful as the Cisco units but you can buy 2 (or more) for the same price.
Note: Units have been installed about 5 months now at a condo building in the Colorado mountains at about 9000 feet. Units are mounted outdoors. Temperature range in that time has been about 85 to -20 F. So far so good.

Click Here to see more reviews about: TRENDnet 14dBi High Power Wireless Outdoor PoE Access Point TEW-455APBO (White)

The 14dBi High Power Wireless Outdoor PoE Bridge/Access Point provides secure Super G (108Mbps) wireless bridging in a durable all-weather outdoor enclosure. This self-contained product comes with a built-in directional antenna for professional long distance wireless bridging applications. External antenna can also be used for more challenging extended range projects. Power is supplied through included Power over Ethernet injector, resulting in equipment and installation cost savings.

Buy NowGet 10% OFF

Click here for more information about TRENDnet 14dBi High Power Wireless Outdoor PoE Access Point TEW-455APBO (White)

Read More...

Cisco Aironet 1231 - wireless access point ( AIR-AP1231G-A-K9 ) Review

Cisco Aironet 1231 - wireless access point ( AIR-AP1231G-A-K9 )
Average Reviews:

(More customer reviews)
This access point does require a little bit of "know how". In fact, there are technical classes you can take on this access point. The material is 800+ pages. I am a techy and I prefer this access point above all others. It transmits the bests signal, it provides the most secure options, and fall back repeater mode if you have multiple. The attenas available to purchase are numerous for so many different topologies and deployment strategies. This access point is a business line access point, not a consumer line access point. The previous comment was from an individual who obviously doesn't know much about wireless. It is the best access point on the market in my opinion. For business use, it is the only one I will use.

Click Here to see more reviews about: Cisco Aironet 1231 - wireless access point ( AIR-AP1231G-A-K9 )

MODEL- AIR-AP1231G-A-K9 VENDOR- CISCOFEATURES- Cisco Aironet 1200 Series Access Point The Cisco Aironet 1200 Series Access Point provides the followingphysical interface connections:2.4 GHz radio (1 Mini-PCI)5 GHz radio (1 CardBus)5 GHz antennas (2 Reverse Polarity-Threaded Naval Connector (RP-TNC) for RM22A radio)2.4 GHz antennas (2 RP-TNC)10/100 Ethernet (1 RJ-45)Console (1 RJ-45)Local power (1 Barrel connector) The mini-PCI interface supports either an IEEE 802.11b or 802.11g radio operating in the 2.4 GHz frequency band. The CardBus interface supports an IEEE 802.11a radio operating in the 5 GHz frequency band. At least one radio must be installed for the access point to operate in a WLAN and at most two radios (one of each form factor) can be installed. Cisco Aironet 1200 Series modular access points feature antenna connectors for greater range or coverage versatility using a broad selection of available Cisco antennas as well as a rugged metal housing for operation over extended temperature ranges typical of demanding environments. The 802.11g radio delivers industry-leading range and throughput meeting the performance requirements of industrial and enterprise applications while hardware-assisted AES encryption provides uncompromised support for interoperable IEEE 802.11i and WPA2 security. While the 802.11g-configured Cisco Aironet 1200 Series meets the needs of many industrial applications its modular design allows dual radio configuration and field upgradeability so administrators can deploy a wireless network optimized for their evolving requirements. The Cisco Aironet 1200 Series supports Cisco IOS Software and is a component of the Cisco SWAN framework a comprehensive framework that

Buy Now

Click here for more information about Cisco Aironet 1231 - wireless access point ( AIR-AP1231G-A-K9 )

Read More...